Skip to main content

Start Sharing Your Cost/Unit and Min/Max Prices with SmartRepricer

Integrate with SmartRepricer to sync your InventoryLab min/max prices and cost/unit data effortlessly.

Updated over a week ago

Connect InventoryLab to SmartRepricer to automatically share the Total Cost per Unit, Minimum Price, and Maximum Price values entered while listing with InventoryLab. To get started, follow the integration steps below.

Integration Steps

Note: The integration must be turned On in InventoryLab first.

InventoryLab

  1. Click your name in the upper-right corner.

  2. Select Settings.

  3. Select Integrations from the menu on the left.

  4. Click the toggle for SmartRepricer.

  5. Click Connect and then Got It!

SmartRepricer

  1. Navigate to SmartRepricer.

  2. Click Settings in the menu on the left.

  3. Select Integrations.

  4. Click Connect to the right of your Amazon US account.

  5. Select InventoryLab from the integration options.

  6. Unless you want to limit how much information is sent to SmartRepricer, leave both the Update Cost and Update Min/Max Price boxes checked.

  7. Click Save to confirm.

Batch Settings

To enter min/max prices in InventoryLab, select Send to Amazon or Save to InventoryLab as your Min/Max Preference for your batch. You can do this while starting a batch or by editing an existing batch's settings.
​

This will add the Minimum Price and Maximum Price fields to the Product Information section for each MSKU you add in Find It. The prices you enter in these fields will then be available to share with SmartRepricer.

The Total Cost per Unit field is always available in Find It, but filling it out is optional. Be sure to provide your costs while listing to get the most out of the integration.

Note: Once it is confirmed that Amazon has accepted the list price, InventoryLab sends it to SmartRepricer. This typically takes about 15 minutes.

FAQs

What information does InventoryLab make available for SmartRepricer?

InventoryLab sends SmartRepricer the current, average, and highest Total Cost per Unit along with the Minimum Price and Maximum Price for each of your active MSKUs that has on-hand or inbound quantities available. When setting up the integration in SmartRepricer, the setting Update Cost must be checked to sync cost/unit, while Update Min/Max Price must be checked to sync the minimum and maximum prices.

How often will SmartRepricer sync my data?

Your cost/unit information will update near real-time (within 90 seconds) as you submit batch information or update buy costs in your Inventory pages. Outside of those times, your data will sync every 6 hours.
​

If you have a strategy with min/max prices set up within SmartRepricer, your most recent Minimum Price and Maximum Price for each active MSKU in InventoryLab will be synced within the same timeframes.

What if I want to stop syncing my data?

To stop syncing your data, turn the integration Off in InventoryLab. Your data will immediately stop syncing.

What's Next?

Did this answer your question?